At some point, right around here, I started thinking maybe it would be best to plan a mud wrestling competition to help offset the cost of the pool. I had it all lined up with an announcer, someone to sing the national anthem, live streaming with the GoPro, referee costumes and whistles. I guess it must have been a slow day at work because everyone wanted to help plan the party. But when I got home Mike had pumped all the water out and my mud pit was ready to get a little deeper.
Bummer. No mud wrestling event. Over the next three days the pool was dug. Through it our dump truck got stuck three times at the dump site and took 2 hours to get it out each time. Maybe we were stupid for trying to dig between rain storms. Maybe we would have been smart to capitalize on it a little and build some epic memories (mud pit wrestling)…but the hole is dug. The end.
The rebar began just as the dig was ending.
Because of the rain we’ve worked on the pool for maybe three days total of real physical labor. The rest of the work has been behind the scenes planning lights, getting bids, pricing materials and equipment. In the process I think we’ve been able to hone in on what we do and don’t like but are still very open to suggestions from people who have been through this before. Mike made a time lapse video of the digging we’ve done so far and there is a little surprise in there: Mike decided he wanted to do the digging so enjoy the video I like to call, “The little bobcat that could” and be ready to see some cameo appearances from all members of our family including me with a shovel….
Here is some chicken scratch of our lighting plan so far:
We will be able to control them from an app on our phone or remote and they are led. Instead of two large pool lights we are doing a variety of different smaller lights. This made more sense to us since we have quite a few different seating areas and it’s ideal to place lights behind the seating area rather than shining at it. Unless you like when lights get shined directly into your face….
As I understand it, two 320’s = one standard pool light in terms of lumens and four 160’s = one standard pool light and eight 80’s = one standard pool light. And one standard pool light = very stark and blinding light that no one really wants to look into. So being able to cut that up and distribute it around the pool makes my “design eye” happy. 😍
Because everyone has done one. Ikea has a few timeless products that get hacked over and over and I hope they never phase them out. One of which was Tarva – those are gone but another is the Billy. It seems that every diy site has a Billy hack somewhere and ours isn’t anything special – except that it’s ours. I had been planning a wall of Billy since the design of our master bedroom. Sure, I could have built my own bookshelves from scratch – and I’ve done that when the dimensions didn’t fit something Ikea had that I could hack. But I chose Billy for this because the dimensions worked and also the cost of using the Billy was only 100 bucks more but came painted, cut, finished and ready to use. If you are looking to do this on the cheap and you have plenty of time then build your bookcases out of sanded plywood, sand, prime and paint them…but if you are willing to just spend a little bit more and save yourself some serious time using the Billy just makes perfect sense.
So, without further ado, our wall of billy:Everyone has different storage needs and space. We were able to fit two standard Billy’s on the left side (31.5″ wide) one half width (15.75″) between them and one standard Billy on the right. We did not use the height extensions. Our room has 8′ ceilings. Mike and I built a platform to put the Billy’s on so that we could use the same baseboards we have throughout the house to make them appear built in. Then I added trim to the top that matches the trim I put in around all the windows.
Step 1: build your Billy’s – preferably in the room you want them and put them in their relative space. We attach the backs with a stapler rather than going crazy with the billion teeny tiny nails they provide. We separated the Billy’s by 3/4″ – basically the width of the plywood we had leftover from another project. I knew I wanted to add trim to the front of the Billy’s to hide the gaps and that seemed to be just the right width for 1×3″ trim. See the gaps?
Step 2: now that your Billy’s are in place you can measure and build your platform. We built the platform out of 3/4″ plywood that we just finish nailed together along with a 3/4″ top. We had this 3/4″ left over from something else, you can use whatever you have as long as you take care to make it square and structurally stable. We made it flush with the billy bookcases that would sit on it so all the trim would line up. It is about 5″ tall.
Step 3: attach the billy’s to the platform. We used screws to attach them into the platform in areas that would be covered with trim. Be sure to use shims and a large level to make sure everything is level and square. We then attached the billy’s together by screwing through the 3/4″ filler between them. This all got concealed behind trim.
Step 4: secure the billy’s to the wall. We live in California and an earthquake could easily shake these over so we never skip this step. We used the brackets that come with the bookcases and some more leftover wood screwed into the studs in the wall. We used 2 1/2″ long screws. This put the screws about 1.25″ into the stud. We used two screws per stud.
Attach the baseboards and realize there is a nice gap that needs to be filled between the bookcase base and the horizontal trim. Nail some 1/4″ lattice wood in the gap and soften the edge with a 3/8″ dowel. I glued the dowel in place with caulk. Also, for the baseboards, I didn’t remove the baseboards behind the bookcases. Mike didn’t want me to, one because I had finally just finished caulking and touching them up since the addition and two, just in case we ever wanted to remove the bookcases (yeah right – these things are the best part of our room). In order to leave them in place and join the new baseboards to it I coped the interior corner joints. I have a really great trick for using your miter saw to cope joints if you’re ever interested. Careful though, once you learn to cope you may never join baseboards together in any other way!
In order to add the crown trim we had to nail some filler to the ceiling so that the crown had something to attach to. These sit about 3/4″ back from the face and sides of the bookcases so that the crown trim sits flush on top of the bookcase. See the pics.
To clarify, the tall, flat part of the crown is 1x the height of the space between the billy and the ceiling and nailed into that board we put on the ceiling and a couple of boards we attached to the top of the billy that also secured all the billy’s together on the top. Our roof trusses run perpendicular to the bookcases so we were able to attach the ceiling board right into them. If you aren’t able to do this use drywall anchors when you attach your board.
I miter cut the corners so that the seams aren’t visible. Then I covered the seam between the 1×3 and the top with some square trim. The crown was just a larger more ornate version of the crown on our windows. I also attached some of that lattice to the front of each shelf. Then I filled all the holes, caulked all the seams, lightly hand sanded everything and wiped it all down, primed the bare wood surfaces and then painted everything with two coats of my favorite trim paint – Ben Moore Decorator’s White in a semi-gloss finish.